View 050-113_8402151.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this copyrighted document is the property of glenair, inc. and is furnished on the condition that it is not to be disclosed, reproduced in whole or in part, or used to solicit quotations from competitive sources, or used for manufacture by anyone other than glenair, inc. without written permission fr om glenair, inc. the information herein has been developed at glenair's expense and may be used for engineering evaluation and incorporation into technical specifications and other documents which specify procurement of products from glenair, inc. 050 - 113 media converter, dual or single channel , panel mount 10/100/1000base - t to fiber optic ethernet (1000base - sx, 1000 base - lx10 or 100base - fx) , 28vdc, m38999 (signal & power ), m38999 ( fiber optic ) rev description date approved 7 6/23 /2015 mf /ras
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 2 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) 10/100/1000base - t to 1000base - sx or 1000base - lx 10 the glenair 05 0 - 113 is a 10/100/1000base - t to fiber media converter that can be configured for 1 or 2 channels and can suppo rt conversion to 1000base - sx, 1000base - lx or 100base - fx protocols . it is designed for harsh environme nts and incorporates electronics in an environmentally sealed enclos ure that incorporates two environmental m38999 connectors . one connector is utilized for power and electrical signal and the second connector is used for the fiber optic signal s and can be configured to support either single mode or multi - mode fiber applications. key features/benefits ? 1310nm fp lasers for 1000base - l x 10 ? ingaas pin pd for 1000base - lx 10 ? 850nm lasers for 1000base - sx ? gaas pin pd for 1000base - s x ? 1300nm led for 100base - fx ? pin pd for 100base - fx ? wide input voltage range: 18- 36v ? electrical interface compliant with ieee 802.3 ( 10/100/ 1000base - t) ? optical interface compliant with ieee 802.3 (1000base - lx 10, 1 000base - sx , 100base - fx) ? magnetics on the electrical s ignal input side to support 10/100/1000base - t operation over 100m cat 5e ? ip67 in mated condition ? m 38999 electrical signal & power ? m 38999 fiber optic connector ? panel mount , either j1 or j2 optional features ? built in test console port accessible via usb2.0 ? built in test console port accessible via uart applications ? harsh environment ethernet for airborne, tactical and shipboard applications
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 3 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) functional block diagram single or dual media converter note: fiber optic channels can be 1000base - lx 10 , 1000base - sx, 100base - fx other fiber optic connections are possible ? contact factory
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 4 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) connectors name insert arrangement function media converter mating plug connector j1 d38999 series iii mil - std - 1560 arrangement 15 - 35 electrical signal, status and built in test (bit) , & power d 38999 series iii type 15 - 35 pin contacts , 22d generic pn d38999/26# d35 sn glenair pn 233 - 105 - g6#15 - 35sn socket contacts , 22d j2 d38999 series iii mil - std - 1560 arrangement 13 - 4 fiber optic signal d 38999 series iii type, 13 - 4 pin contacts lx10 configuration: sx or fx configuration: generic pn d38999/26# c 35sn glenair pn 180 - 091##06 - 13 - 4sn socket contacts lx10 configuration glenair pn 181 - 001 - 126s (m29504/5 - 4238 ) sx configuration glenair pn 181 - 001 - 126 (m29504/54239) note: # = environmental class (material/finish)
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 5 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) built in test (bit) functionality - optiona l features this media converter can be offered with built in test functionality accessible through a console port via universal serial bus 2.0 (usb 2.0) or via rs422 uart ( txd) or both options can be made available. functional block diagram for this is shown below. universal serial bus (2.0) bit ? presents itself as a ?virtual? communications port ? compatible with microsoft windows, mac, and linux os?s. ? on the computer side, open any terminal application (putty, hyperterm, teraterm, etc.) to communicate with the media converter hardware. ? simple ?human readable? status messages.
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 6 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) typical usb console window (putty)
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 7 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) built in test (bit) functionality ? uart this media converter can be offered with built in test functionality accessible via an rs - 422 port. the uart bit message is a 10 bit message with an update rate of 1 hz. the message format can be seen below. alarm status messages ? fiber link status (up or down) ? copper l ink status (up or down) serial status message bit mapping bit description 0 channel 1 fiber optic tx fault (1 = fault, 0 = no fault) 1 channel 1 ethernet copper link up (1 = link up, 0 = link down) 2 not used 3 not used 4 channel 2 fiber optic tx fault (1 = fault, 0 = no fault) 5 channel 2 ethernet copper link up (1 = link up, 0 = link down) 6 not used 7 not u sed
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 8 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) ratings and specifications ? lx10 version e thernet c ompliance a bsolute m aximum r atings parameter symbol min typ max units notes storage temperature ts - 55 +100 c supply voltage v cc - 0.5 40 v o perating c onditions parameter symbol min typ max units notes operating temperature t op - 40 +85 c supply voltage v cc 18 28 36 v supply current icc 100 150 ma @28vdc per channel power supply noise (peak - peak) v cc ripple 200 mv o ptical c haracteristics ? t ransmitter parameter symbol min typ max units notes optical output power p out - 8 .5 - 4 - 3 dbm 1310nm fabry - perot optical wavelength out 1285 1310 1345 nm spectral width ? 3.5 nm o ptical c haracteristics ? r eceiver parameter symbol min typ max units notes optical sensitivity ( input power range ) p in op - 20 0 dbm min. sensitivity, ber 10 - 12 , prbs 2 - 7 - 1 p in min - 22 - 20 dbm pin pd , lx10 source overload, ber 10 - 12 , prbs 2 -7 - 1 p in max 0 dbm optical wavelength in 1 100 1310 1 590 nm parameter medium type distance notes gigabit ethernet, ieee 802.3ab, 1000base - t tia/eia - 568 - b cat 5e 100m gigabit ethernet, ieee 802.3z , 1000base - lx 10 single mode fiber (9/125m) 10 km
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 9 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) ratings and specifications ? sx version e thernet c ompliance a bsolute m aximum r atings parameter symbol min typ max units notes storage temperature ts - 55 +100 c supply voltage v cc - 0.5 40 v 1 second maximum o perating c onditions parameter symbol min typ max units notes operating temperature t op - 40 +85 c supply voltage v cc 18 28 36 v supply current icc 100 150 ma @28vdc per channel power supply noise (peak - peak) v cc ripple 200 mv o ptical c haracteristics ? t ransmitter parameter symbol min typ max units notes optical output power p out - 9.5 - 4 dbm vcsel, 62.5/125m mm optical wavelength out 830 850 860 nm spectral width ? 0.85 nm o ptical c haracteristics - r eceiver parameter symbol min typ max units notes optical sensitivity (input power range) p in op - 17 - 2 dbm min. sensitivity, ber 10 -12 , prbs 2 - 7 - 1 p in min - 22 - 17 dbm pin pd overload, ber 10 - 12 , prbs 2 -7 - 1 p in max - 2 - 1 dbm optical wavelength in 770 850 860 nm parameter medium type distance notes gigabit ethernet, ieee 802.3ab, 1000base - t tia/eia - 568 - b cat 5e 100m gigabit ethernet, ieee 802.3z, 1000base - sx om3 mmf (50/125m) om 1 mmf (62.5/125m) 550m 275m 850nm vcsel
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 10 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) ratings and specifications ? fx version e thernet c ompliance a bsolute m aximum r atings parameter symbol min typ max units notes storage temperature ts - 55 +100 c supply voltage v cc - 0.5 40 v 1 second maximum o perating c onditions parameter symbol min typ max units notes operating temperature t op - 40 +85 c supply voltage v cc 18 28 36 v supply current icc 100 150 ma @28vdc , per channel power supply noise (peak - peak) v cc ripple 200 mv o ptical c haracteristics ? t ransmitter parameter symbol min typ max units notes optical output power p out - 19 - 14 dbm 1300nm led (iec 9314 - 3) optical wavelength out 1270 1310 1380 nm spectral width ? 150 nm o ptical c haracteristics - r eceiver parameter symbol min typ max units notes sensitivity, ber 10 -10 , prbs 2 -7 - 1 p in - 32 dbm pin pd overload, ber 10 - 1 0 , prbs 2 - 7 - 1 p in - 14 dbm optical wavelength in 1270 1310 1380 nm parameter medium type distance notes fast ethernet, ieee 802.3u, 100base - t tia/eia - 568 - b cat 5e 100m fast ethernet, ieee 802.3u, 100base - fx, iec 9314 - 3 mmf (50/125m) & (62.5/125m) 2km
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 11 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) ratings and specifications - (continued) compliance specification s characteristic standard condition notes mechanical shock mil - std - 810 40g 6 - 9rms mechanical vibration mil - std - 810 30g rms esd mil - std - 883 class ii 2200v hbm conducted emissions, power leads, 30 hz to 10 khz mil - std - 461f ce101 conducted emissions, power leads, 10 khz to 10 mhz mil - std - 461f ce102 conducted susceptibility, power leads, 30 hz to 150khz mil - std - 461f cs101 conducted susceptibility, transients, power leads mil - std - 461f cs106 conducted susceptibility, structure current, 60 hz to 100 khz mil - std - 461f cs109 conducted susceptibility, bulk cable injection, 10 khz to 200 mhz mil - std - 461f cs114 radiated susceptibility, magnetic field, 30 hz to 100 khz mil - std - 461f rs101 radiated susceptibility, electric field, 2 mhz to 18 ghz mil - std - 461f rs103 radiated emissions, magnetic field, 30 hz to 100 khz mil - std - 461f re101 radiated emissions, electric field, 10 khz to 18 ghz mil - std - 461f re102 mating durability mil - dtl - 38999/20 500 cycles flame resistance eia364 - 104 30 seconds damp heat eia364 - 321 240 hours aircraft electrical power characteristics mil - std - 704f 28v dc systems eye safety cdrh and iec - 825 class 1 laser product
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 12 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) ratings and specifications - (continued) material/finish mater ial/fi nish item material/finish housing & connector shell aluminum plating finish: m nickel plating finish: mt nickel ptfe plating finish: nf olive drab cadmium contacts copper alloy, 50 i nch gold plated d38999 inserts thermoplastics interfacial seals , 38999 only elastomer, fluorosilicon optical ferrules & sleeves zirconia, ceramic insulators liquid crystal polymer (lcp) contact retention clip beryllium copper alloy seal, o - rings fluorosilicone rubber seal silicone elastomer spring nickel - plated beryllium copper pc tail contacts copper alloy/gold p lated pcb flex fr4 & polyimide encapsulant hysol ee4215 solder type: connector pc tails to pcba sn63pb37 solder type : pcba component attach rohs compliant sn95/sb5 (232c melting temp) & rohs compliant sn96.5/ag3.0/cu0.5 (217 melting)
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 13 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) outline drawing & panel cut out dimensional tolerances unless specified otherwise: 0.x 0.1 0.xx 0.03 0.xxx 0.005 marking: assembly is identified with manufacture?s name, cage code, part number, date code and serial number in approximate location shown connectors will be covered with protective caps at time of shipment please contact glenair for other configurations panel cut out C j1 or j2 approx. marking location
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 14 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) input/output definition j1 ? electrical signal connector d38999 series iii 15 - 35 mating face for pin shown 37 x size 22d j1 pin function assignments pin name description notes pin name description notes 1 nc no connection 19 nc no connection 2 ch2_mdc - 2 20 ch2_mdc+ 2 3 ch2_mdd - 2 21 pss power supply status 1 4 ch2_mdd+ 2 22 ch1_mdd+ 2 5 ch2_mdb - 2 23 ch1_mdc+ 2 6 ch2_mdb+ 2 24 ch1_mdb+ 2 7 ch1_mdd - 2 25 ch1_mda - 2 8 ch1_mdc - 2 26 usb_vbus_rtn usb return 3 9 ch1_mdb - 2 27 uart_p rs422 bit output 4 10 usb_dp usb data + 3 28 nc no connection 11 usb_dm usb data - 3 29 uart_n rs422 bit output 4 12 usb_vbus usb +5v input 3 30 nc no connection 13 nc no connection 31 nc no connection 14 vin_rtn vin return 32 ch2_mda - 2 15 vin_rtn vin return 33 nc no connection 16 vin +28 vin 34 ch1_mda+ 2 17 vin +28 vin 35 nc no connection 18 nc no connection 36 nc no connection 37 ch2_mda+ 2 notes 1. power supply status indicator is high , referenced to 3.3v dc, when power supply is working correctly and low for fault or warning condition . 2. ieee - 802.3 1000base - t compliant 3 built in test port, usb2.0 4 built in test port, rs422 uart ( txd)
?2014 glenair, inc. rev: 7 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 15 of 15 e- mail: sales@glenair.com 050- 113 media converter, single or dual cha nnel, panel mount 10/100/1000base - t to fiber optic ethernet (sx, lx10 or fx) input/output definition (continued) j2 ? fiber optic connector d 38999 series iii, 13- 4 mating face for pin shown 4x size 16 pin contacts j2 pin function assignments pin name description notes a ch 1 ? transmitter b ch 1 ? receiver c ch 2 ? transmitter d ch 2 ? receiver

▲Up To Search▲

Price & Availability of 050-113

	To Download 050-113 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .